Drinking Water for New Zealand

Managed by ESR for the Ministry of Health.         Data extracted from the National DWO Database.

nz map


go to ESR web page Home Drinking water header
ESR Website
Home Supplies Water Carriers Laboratories NZ Processes Reference  

NZ Processes

Related items:

Priority 2 determinands

Public Health Grading of Supplies

Currently there is no national requirement for supplies to be graded, but the option remains for each supplier. The current grading specification was released by the Ministry of Health in 2003.

What is the Public Health Grading?

The grading is an way of comparing water supplies and indicating whether or not they are likely to deliver good quality water.The initial intention was that all supplies serving more than 500 people would be expected to be graded, but since the Health Act amendment of 2007, the emphasis has moved towards ensuring supplies meeting the Standards and the requirements of the Act..

How are supplies graded? First they are examined to find out how they function, where the water comes from, what is done to it, how often its quality is checked and what the results indicate. In all, 33 aspects of the source and treatment are examined, along with 22 factors for the distribution system and final water quality. There is a strong concern, not only about the quality of the end product, but also about whether adequate barriers to potential contamination are in place in the system. This is important, because even frequent monitoring can miss some pollution events.

For each zone (ie area of similar water received), a two-letter grading is designated, such as Aa, Cb, Ed, etc. The capital letter (A1, A, B, C, D or E) represents the grade of the water coming into the zone (ie source quality and treatment) while the lower-case letter (a1, a, b, c, d or e) indicates the quality of the water received at your gate. Typically, if one tends to be high (A or B), so will be the other (a or b), but any combination is possible.

As a very rough rule of thumb, for a grade of Bc, the B represents the best potential quality (regarding risks of contamination, etc), as it leaves the treatment plant, while the c is the actual quality received by the consumer. This is a gross simplification, but is useful to gain an initial grasp of how the letters relate.

Within the supply listings on this website, each graded zone has its two-letter grade listed on the same line. Each contributing plant has its "source and treatment" upper case grade alongside it. Where only one plant serves a zone, this grade is the same as the upper case letter in the zone line, so it hardly needs repeating. However, if two or more plants serve a zone, the "worst case" plant grade is the one taken up by the zone. Having it all here lets you see if any plant is associated with more risk than the others.

The Source and Plant grading (A1 to E)

This grading relates to the water as it is when leaving the treatment plant, before it enters the reticulation system. It is concerned with the barriers guarding against contaminated water. Possible grades are:

Grade Description

A1       Completely satisfactory, negligible level of risk, demonstrably high quality
A Completely satisfactory, extremely low level of risk
B Satisfactory, very low level of risk when the water leaves the treatment plant.
C Marginally satisfactory, low level of microbiological risk when the water leaves the treatment plant, but may not be satisfactory chemically.
D Unsatisfactory level of risk
E Unacceptable level of risk
U Ungraded

Gradings are calculated using a complex algorithm involving multiple tables. Factors include the water’s origin, characteristics, and compliance with standards and the degree of treatment and process supervision. Each grade can be attained by a variety of factor combinations.

However, some generalisations can be made:

In conclusion, water of grade C is considered marginal. It may be acceptable to consumers in very small supplies if the alternatives are too expensive or otherwise impracticable.

Water of grade A or B is considered as safe, while a grading of D or E indicates either the water is unsafe, or inadequate data or procedures are in place to demonstrate otherwise. This is an important proviso, since both the grading and standards emphasise that you have to show it is safe. Finding nothing wrong because you hardly looked is not acceptable.

The Distribution Grading (a1 to e)

Emphasis in this part of the grading is on the quality of the water and the systems in place (procedures and reticulation quality) to minimise the risk of unsafe water to the consumer. The grading is calculated using a questionnaire, with demerit marks awarded for unsatisfactory aspects.

Grade Description, with Sum of Marks

Grade Range of marks Meaning
a1 0 - 10 Completely satisfactory, negligible level of risk, demonstrably high quality; meets Aesthetic Guidelines and has ISO 9001:2000 accreditation
a 0 - 10 Completely satisfactory, extremely low level of risk
b 11 - 20 Satisfactory, very low level of risk
c 21 - 30 Marginally satisfactory, moderately low level of risk
d 31 - 45 Unsatisfactory level of risk
e 46 or more Unacceptable level of risk
u - Ungraded

Demerits are given for a variety of reasons, including (most significant ones first):

While the combinations are obviously many, three important conclusions are:

As emphasised in the earlier discussion, while chemical risks are important, the primary risk is microbiological.

To conclude, an "a" or "b" grade is satisfactory, a "c" is marginal and "d" or "e" are unsatisfactory.

If you are concerned by your grading . . .

The Register shows the gradings for supplies, but it does not go further. For a low grading, it does not say exactly why it is low, or what would make it higher.

A grading below Cc is unsatisfactory. The grading may arise for a number of reasons, including:

Note that in each case the "solution" will probably require money, although in some situations improved management of the resource may significantly affect the grading allocated.

The emphasis in the grading, and in the Drinking-Water Standards for New Zealand 2005, is on "demonstrable quality of water", ie not just "it seems OK", but "it is safe and we have taken measures so that any risks to its quality are minimal".

If you are concerned about your supply’s grading or water quality, contact those responsible for your supply, who are usually your city or district council (check the supply listing for owner).

More about the Grading

You can download the official Public Health Grading of Community Drinking-Water Supplies 2003 document from the Ministry of Health website, in Word or PDF format.

Note that there is also an amendments document on the same Ministry web page that you need to download. These amendments were made in September 2004, a year after the Grading specification, and describe changes in the points allocation for grading a zone. You should manually change your downloaded copy of the main document accordingly.



Home  |  Water Supplies  |  Water Carriers  |  Laboratories  |  NZ Processes  |  Reference  |  Contacts

ESR Risk & Response Group Web Solutions ©